Cisco 500 Series WPAN Industrial Routers – Cisco Dubai UAE

Cisco 500 Series WPAN Industrial Routers Dubai

Deploy enterprise-class WPAN communications

Cisco 500 Series wireless personal area network (WPAN) industrial routers provide unlicensed 915-MHz industrial, scientific, and medical band WPAN communications. They help enable a diverse set of Internet of Things applications, including smart metering, smart grids, distribution automation, supervisory control and data acquisition, and street lighting. (Source)

Table 1.  Cisco IR500 Hardware Specifications

Feature

IR 500 Hardware Specifications

Dimensions (W x D x H)

10.2 cm x 12.79 cm x 3 cm (4 in. x 5 in. x 1.2 in.)

Typical Weight Fully Configured

0.85 lbs (0.4 kg)

Operating Temperature

-40°C to +70°C (-40°F to 158°F) with type test up to 85°C (185°F) for 16 hours

Typical Power Consumption or Dissipation

5 Watts, depending on configuration

IEEE 802.15.4 WPAN

IEEE 802.15.4g/e

Frequency Support

902-928 MHz (and subset of it to comply with country’s regulations)

●  North America- ISM: 902-928 MHz
●  Australia: 915-928 MHz
●  Brazil: 902-907.5, 915-928 MHz
●  Hong Kong: 920-925 MHz
●  China: 920- 925 MHz
●  Singapore: 920-925 MHz

Spread Spectrum Technology

FHSS

Transmitter Output

30 dBm

Antenna Connector

QMA, female

10/100 Fast Ethernet Copper Ports

1

RS 232/RS 485 Serial Port- Software Configurable
(RJ 45 Connector)

1

RS 232 Serial Port
(RJ 45 connector)

1

Digital Alarm Inputs

1

USB Type A Network Ports

1 (hardware-ready)

Console and AUX Port (RJ-45)

1

Integrated DC Power Supply

10.6–52 VDC (nominal), 9-60 VDC (optimum)

Environmental Compliance

●  IEC-61850-3
●  IEEE1613
●  C37.90 high-voltage impulse

Immunity

●  EN61000-6-2
●  EN61000-4-2 (ESD)
●  EN61000-4-3 (RF)
●  EN61000-4-4 (EFT)
●  EN61000-4-5 (SURGE)
●  EN61000-4-6 (CRF)
●  EN61000-4-11 (VDI)
●  EN 55024, CISPR 24
●  EN50082-1

EMC

●  47 CFR, Part 15
●  ICES-003 Class A
●  EN55022 Class A
●  CISPR22 Class A
●  AS/NZS 3548 Class A
●  VCCI V-3
●  CNS 13438
●  EN 300-386

Safety

●  USA: UL 60950-1
●  Canada: CAN/CSA C22.2 No. 60950-1
●  Australia/New Zealand: AS/NZS 60950.1
●  Rest of world: IEC 60950-1
●  UL certified to UL/CSA 60950-1, 2nd Ed.
●  CB report to IEC60950-1, 2nd Ed., covering all group differences and national deviations

Table 2.  Cisco IR500 Software Specifications

Feature

Software Specifications

PHY/MAC Layer

●  IEEE 802.3 Ethernet 10/100 Mbps
●  RS232/RS485 Serial
●  IEEE 802.15.4g WPAN
●  IEEE 802.15.4e WPAN MAC extensions
●  6LoWPAN – RFC 4919, 4944 and 6282

Network and Transport Layer

●  IPv4 (RFC 791, 826, 1918)
●  IPv6 (RFC 2460)
●  UDP (RFC 768)/TCP (RFC 793)
●  IETF Routing Protocol for Low Power and Lossy Networks (RPL) 
(RFC 6206, 6550, 6551, 6553, 6554, 6719)
●  NAT44 (RFC 1918 and 2663)
●  MAP-T (draft RFC MAP-T)

Application Layer

●  Raw Sockets support on serial ports (for transport of non-IP protocols such as DNP3 and other legacy serial protocols)
●  DHCPv6 (RFC 3315) for IPv6 address allocation
●  IETF Draft RFC Constrained Application Protocol (CoAP) for network management

Security

●  Encryption: AES-128 (IEEE 802.11i for WPAN key management)
●  Authentication and authorization: IEEE 802.1x for WPAN authentication and encryption; X.509 certificate support with integration into customer’s PKI
●  Hardware-based device identity: IEEE 802.1AR (hardware-ready)
●  Role-based access control (RBAC) for device configuration
●  Secure boot loader and signed firmware images

Quality of Service

●  Classification and marking: Layer 3 – Differentiated Services Code Point (DSCP)
●  Congestion management: Priority Queuing (PQ)

Table 3 lists the IR500 hardware product ID (PID).

Table 3.       Cisco IR500 Product ID

Item

Specification

IR509UWP-915/K9

IR509 with 915MHz-WPAN, 1 FE, 2 serial, utility-grade DC power

Table 4 lists the antenna options for IR500.

Table 4.  Cisco IR500 Antenna Options

Item

Specification

ANT-WPAN-OM-OUT-N

●  Omni antenna for 900 MHz WPAN
●  Outdoor

Table 5 lists the RF cable options for the IR500.

Table 5.  Cisco IR500 RF Cable Options

Item

Specification

Indoor Cable Options

CAB-L240-10-Q-N

10-ft (3 m) Low Loss LMR 240 Cable with QMA and N Connectors

CAB-L240-15-Q-N

15-ft (4.5 m) Low Loss LMR 240 Cable with QMA and N Connectors

CAB-L240-20-Q-N

20-ft (6 m) Low Loss LMR 240 Cable with QMA and N Connectors

Outdoor Cable Options

CAB-L400-5-N-N

5-ft (1.5 m) Low Loss LMR 400 Cable with N Connectors (straight to right angle)

CAB-L400-5-N-NS

5-ft (1.5 m) Low Loss LMR 600 Cable with N Connectors (straight to straight)

CAB-L400-20-N-N

20-ft (6 m) Low Loss LMR 400 Cable with N Connectors

CAB-L600-30-N-N

30-ft (9.14 m) Ultra Low Loss LMR 600 Cable with N Connectors

Table 6 lists additional accessories available for the IR500.

Table 6.  Additional Accessories for Cisco IR500

Item

Specification

CGR-LA-NF-NF

Lightning arrestor

ANT-ADPTR-Q-TNC

Connecting adapter for CGR antennas- QMA to TNC

Leave a Reply

Your email address will not be published. Required fields are marked *